Back to Blog
Buying Guides 2026-11-17 Hand Held Legend 1 views

FunnyPlaying Clear Speakers: GBA, GBA SP and Color Fit Guide

FunnyPlaying Clear Speakers: GBA, GBA SP and Color Fit Guide

Match a FunnyPlaying clear speaker to your Game Boy model: GBA SP, GBA, Color or Pocket. Compare solderless vs pre-soldered wires and what each listing confirms.

Start with the console, not the color

All three FunnyPlaying clear speakers share the same clear look, but they do not share the same fit. The listing for each one names a specific console family, and that line is the first thing to check before you buy. The Game Boy Advance SP speaker is built for the SP; the Game Boy Advance speaker is for the original GBA; and the Game Boy Color and Pocket speaker covers those two older models only.

If you are shopping by color alone, you can easily end up with a speaker that will not drop into your shell. Use the console model as your filter, then compare the installation details below.

What each clear speaker is built for

  • Game Boy Advance SP Clear Speaker - FunnyPlaying: Designed for the Game Boy Advance SP console and listed as drop-in and solderless. If you have an SP and want to avoid soldering, this is the only one of the three that the listing describes as solderless.
    Game Boy Advance SP Clear Speaker - FunnyPlaying
    Game Boy Advance SP Clear Speaker - FunnyPlaying
  • Game Boy Advance Clear Speaker - FunnyPlaying: For the Game Boy Advance console only, with wires pre-soldered and rated 8 ohm, 1 Watt. The original GBA uses a different fit, and the pre-soldered wires mean you will need to connect them rather than drop the speaker in.
    Game Boy Advance Clear Speaker - FunnyPlaying
    Game Boy Advance Clear Speaker - FunnyPlaying
  • Game Boy Color and Pocket Clear Speaker - FunnyPlaying: For the Game Boy Color and Pocket model only, with wires pre-soldered and rated 8 ohm, 1 Watt. This is the shared option for two older consoles, but the listing does not break out separate fit notes for each, so confirm your model before ordering.

Solderless vs pre-soldered: the practical difference

The SP speaker is the odd one out in a useful way. FunnyPlaying lists it as drop-in and solderless, which means the installation path is different from the other two. The GBA and Color/Pocket speakers both come with wires already attached to the speaker, so the connection work moves to the other end of those wires.

That does not automatically make one better than the other. It changes what tools and skills you need. If you are comfortable soldering, the pre-soldered wires can still be convenient. If you are not, the SP speaker is the one the listing specifically calls solderless.

  • Game Boy Advance SP Clear Speaker: Drop-in, solderless design per the listing. No wires mentioned in the supplied features.
  • Game Boy Advance Clear Speaker: Wires are pre-soldered. 8 ohm, 1 Watt. For the GBA console only.
  • Game Boy Color and Pocket Clear Speaker: Wires are pre-soldered. 8 ohm, 1 Watt. For Game Boy Color and Pocket only.

Where the clear speaker fits into a build

The SP speaker listing also notes it can be used for DS Lite and GB Macro builds. That is a useful secondary path if you are working on one of those projects, but the primary design target is still the GBA SP. The other two listings do not mention alternate builds in the supplied details.

For the GBA and Color/Pocket speakers, the pairing notes point toward amplifier and audio-cleanup parts rather than alternate consoles. The GBA speaker pairs with the Game Boy CleanAmp v1.1, the Game Boy Advance CleanAmp Pro v1.0, and the Game Boy Advance Wire-Free Dehum Dehiss Kit. The Color/Pocket speaker pairs with the Game Boy CleanAmp v1.1 and the Game Boy Color 680UF Aluminum Capacitor. Those pairings are worth checking if you are already planning audio work.

What the listings do not confirm

The supplied details are clear on model fit and a few electrical ratings, but they are not a full installation manual. Treat the following as open questions to resolve before you start, not as defects in the products.

  • Exact wire length and connector type: The GBA and Color/Pocket listings say wires are pre-soldered but do not give lengths or connector details in the supplied information.
  • Mounting depth and shell clearance: No dimensions are supplied, so check your shell and original speaker position before assuming a drop-in fit.
  • SP speaker wiring method: The SP listing calls it solderless but does not describe the connection in the supplied details. Confirm how it interfaces with your board before ordering.
  • Separate Color vs Pocket fit notes: The Color/Pocket speaker covers both models, but the listing does not break out model-specific differences.

A simple way to choose

Match the console first: GBA SP gets the SP speaker, original GBA gets the GBA speaker, and Color or Pocket gets the Color/Pocket speaker. Then decide whether you want the solderless path of the SP speaker or are set up to work with pre-soldered wires on the other two. If you are already adding an amplifier or audio cleanup part, check the pairing notes for your model before you buy so the pieces are planned together.

Related Articles

Customer Service
Home
Products
Cart
Profile