Back to Blog
How-to Guides 2026-11-20 Hand Held Legend 0 views

How to Replace Game Boy DMG Capacitors with a Kit

How to Replace Game Boy DMG Capacitors with a Kit

Learn how to replace failing capacitors in your original Game Boy DMG using a Console5 capacitor kit. This guide covers what the kit includes, compatibility notes, and installation tips based on supplied evidence.

What the Console5 DMG Capacitor Kit Includes

The Game Boy DMG Capacitor Kit from Console5 contains five high-quality Nichicon and Panasonic capacitors. Specifically, the kit includes three 10µF 25V capacitors intended for C3 on the DMG-LCD-06 board and for C5 and C6 on the DMG-CPU-06 board. The remaining capacitors are ultra-miniature 1µF ceramic caps that replace the original five surface-mount capacitors on the DMG-LCD board.

The kit also comes with documentation: a DMG Ceramic Cap Instructions sheet and a link to the Console5 Wiki, which lists the capacitor values and locations. This documentation is your primary reference during the replacement process.

Kit Contents and Specifications

  • Game Boy DMG Capacitor Kit - Console 5: The kit contains Nichicon and Panasonic capacitors, including three 10µF 25V caps for specific positions on the DMG-LCD-06 and DMG-CPU-06 boards. Knowing the exact capacitance and voltage rating ensures you install the correct part in each location. The 25V rating is higher than the original, which is acceptable per the manufacturer's instructions.
    Game Boy DMG Capacitor Kit - Console 5
    Game Boy DMG Capacitor Kit - Console 5
  • Game Boy DMG Capacitor Kit - Console 5: The kit replaces the five ultra-miniature 1µF capacitors on the DMG-LCD board with ceramic capacitors. Ceramic capacitors are more stable and less prone to leakage than the original electrolytic types, improving long-term reliability.

Installation Steps

These steps are based on the supplied instructions and general capacitor replacement best practices. Always refer to the included documentation for your specific board revision.

  1. Prepare your workspace and tools: You'll need a soldering iron, solder wick or a desoldering pump, isopropyl alcohol, and a small Phillips screwdriver. Ensure good ventilation and a static-safe work area.
  2. Remove the old capacitors: Carefully desolder each old capacitor from the board. Note the orientation of any polarized capacitors (electrolytic types have a stripe indicating negative). For the ultra-miniature 1µF caps, use a low-temperature iron to avoid lifting pads.
  3. Clean the pads: Use isopropyl alcohol and a lint-free swab to remove residual solder and flux from the pads. This ensures a clean joint for the new capacitors.
  4. Install the new capacitors: Place each new capacitor in the correct position, matching the capacitance value printed on the kit's documentation. For the 10µF 25V caps, polarity matters only if they are electrolytic; the kit's ceramic caps are non-polarized, so orientation is not critical. Solder each lead and trim excess length.
  5. Verify your work: Inspect each solder joint for bridges or cold joints. Confirm that all capacitors are installed in the correct locations per the documentation. Power on the console and test for proper function.

Compatibility and Important Notes

This kit is designed specifically for the original Game Boy DMG (DMG-01) motherboard. It replaces capacitors on both the DMG-LCD-06 and DMG-CPU-06 board revisions. The kit's documentation includes a cap list and values, so you can cross-reference with your board's silkscreen.

The supplied instructions state that it is okay to use a capacitor with a higher voltage rating than the original. Do not use a different capacitance value, as that can affect circuit timing or cause damage. If your console has a different board revision (e.g., DMG-CPU-01), verify compatibility before proceeding.

This guide covers the capacitor replacement process only. It does not address other common DMG issues such as a dead speaker, broken power switch, or corroded battery terminals. For those problems, consult additional repair resources.

Related Articles

Customer Service
Home
Products
Cart
Profile