Game Boy Pocket Q5 IPS LCD Backlight Kit - Funnyplaying

Upgrade your Game Boy Pocket (GBP) with this Game Boy Pocket IPS LCD Backlight Kit. IPS LCD's  are characterized as having the best color and viewing angles available today. Take your old and outdated reflective pocket display to a bright and colorful upgrade your 10 year old self could only dream of.

FEATURES:

• Genuine Funny Playing product
  
• Built-in 36 retro color combination VIA touch sensor tap
• RetroPixel display mode VIA 5 second touch sensor hold
  
• Contrast wheel brightness function
  
• Overall power consumption between 0.3 - 0.8W
• Accurate aspect ratio
  
• 11% larger than the original LCD.
• Since GBP USES two AAA batteries, the maximum capacity we can find is at 1100mWh. According to our repeated tests, it ran the original cartridge at normal brightness indoors for about 3 hours.
• It is recommended to use an electronic cleaner to handle your power switch and gray scale adjustment buttons. This makes the LCD brightness adjustment smoother to use.
• Case modification required on original (OEM)/original style shells. Some IPS shells may require modifications.
• Soldering required.
  
• Can be used with original (OEM) or aftermarket lens. However, original lenses may cut off a line of pixels around the image. 
  

INCLUDED:

• 1 x Q5 IPS LCD
• 1 x PCB ribbon cable with attached touch sensor
• 1 x Adhesive
• 1 x Touch sensor ribbon
• 1 x Wire

DOCUMENTATION:

• Install Guide
• Install Video
• How to test your LCD kit - *Soldering is required to dry test this kit. Soldering the power wire in this case will not void the return policy.

NOTES:

• This kit has a touch sensor already attached on the black ribbon cable. You may use this one by simply folding into the front or back of the shell.
• You may also use the separate included touch sensor ribbon and solder it onto the gold pad on the front of the black ribbon cables touch sensor (see media for photo highlighting this pad). You can either solder the separate touch sensor directly to the pad or install along with a wire to customize touch sensor placement.
  
• After installation, if it is noted that your touch sensor is overly sensitive or is cycling, please see this article for assistance. 

WARNINGS:

• Test before installation! When you receive a backlight/LCD kit, you should perform a dry run before installing to assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes the use of adhesives, brackets, and any performed soldering. All ribbon cables should have no bends or creases in them. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed are not eligible for replacement or return.
• LCD may break if put under too much pressure or dropped. Please exercise extreme caution when installing.