GBA SP ITA TFT Laminated Backlight Kit - FunnyPlaying

Add this 3.0" Laminated ITA Kit for GBA SP to your Game Boy Advance SP to make your play more enjoyable with a modern display, featuring enhanced brightness, color and clarity! 

FEATURES:

• OSD menu by holding down brightness button. Medium hold to change function, short press to cycle through function options. Hold down/long press to exit menu.
• OSD menu contains brightness options, X and Y axis adjustments, and FRM (frame blending).
• Memory brightness function.
• We only recommend using the FunnyPlaying IPS/ITA Mirror Clear Shell with this kit. All other shells require modifications. Install on the non-recommended shells at your own risk
• The same display effect as AGS-101, without ghosting, better colors, and brighter backlight.
  
• Logo text on glass lens is holographic.
• Support for NES game display.
• Uses the upper LCD from a DSi (240*160 display). The display size is the same as the original SP LCD. 
• Advanced mod - soldering required. See install guide for further information.

INCLUDED:

• 1x 3.0 Laminated ITA LCD with adhered lens (See Warnings)
• 1x PCB ribbon cable with touch sensor attached
  
• 1x Wire
  
• 1x Insulating Foam

PAIRS WELL WITH:

• GBA SP ITA/IPS Mirror Clear Shell -FunnyPlaying

DOCUMENTATION:

• Install Guide by FunnyPlaying -*Soldering is required to dry test this kit. Performing the step of soldering the ribbon cable to the LCD properly, will not void the return policy. However, obvious user damage due to improper soldering during this step will void the warranty. Please only proceed if you are confident in your soldering abilities. 
• How to test your LCD kit

WARNINGS:

• You do not need to purchase a separate lens. Removing pre-adhered lens from LCD can result in damage to the LCD and will void product warranty. If you received an extra lens in your order, this was likely a included plastic lens with a shell and should NOT be placed on top of the pre-adhered lens.
• Test before installation! When you receive a backlight/LCD kit, you should perform a dry run before installing to assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes the use of adhesives, brackets, and any performed soldering. All ribbon cables should have no bends or creases in them. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed are not eligible for replacement or return.
  
• LCD may break if put under too much pressure or dropped. Please exercise extreme caution when installing.