PSP 1000 IPS LCD Replacement

A new IPS LCD replacement for your broken PSP console. 

FEATURES:

• For PSP 1000 model only.
  
• Durable material.
  
• Screwdriver and spudger required for proper disassembly. 
  
• Soldering required.
• No need ribbon cable adapter.
• Same display size as the original LCD. Same display resolution as the original LCD. 480*272.
• High brightness.
  

INCLUDED:

• 1x PSP 1000 LCD
• 1x Foam Gasket

INSTALLATION:

• Cover the electronic components on the ribbon attached to the LCD with Kapton tape to insulate. Not doing so may result in the LCD shorting. Replacements are not covered in these instances. Please see product photos for reference.

• You will need to short the two pads above the 34pin of the connector. In fact, all PSP1000 motherboards have these two pads, but these two pads are not connected. Connect directly with solder or connect with 'conductive sliver paint'. (You can use conductive sliver paint to connect the two pads if you don't have welding skills). The positions of the two pads are different in different versions of the PSP 1000 motherboard. Please see product photos for install photos.

WARNINGS:

• Test before installation! When you receive a backlight/LCD kit, you should perform a dry run before installing to assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes the use of adhesives, brackets, and any performed soldering. All ribbon cables should have no bends or creases in them. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed are not eligible for replacement or return.
• LCD may break if put under too much pressure or dropped. Please exercise extreme caution when installing.