The coin cell decides the holder
A save battery holder is not a universal part. It is built around one coin cell size, and the cartridge's existing battery footprint decides which size you need. The two holders here split along that line: the CR1616 holder covers Game Boy-family cartridges, while the CR2032 holder covers NES, SNES and N64 carts and is offered in two physical sizes.
Both are replacement holders that require soldering. Neither listing supplies a battery, so the cell is a separate purchase. The practical comparison is therefore about cell size, holder size and which cartridge family you are repairing.
What each holder is built to hold
- Game Boy Game Cartridge CR1616 Save Battery Holder: Holds a CR1616 save battery, which is purchased separately. The holder is sized for one cell type. If your cartridge takes a CR1616, this is the matching holder; if it takes a CR2032, it is not.

Game Boy Game Cartridge CR1616 Save Battery Holder - Save Battery Holders for NES SNES N64 - CR2032: Holds a CR2032 battery and comes in two sizes: 25mm and 18mm. The CR2032 cell is fixed, but the holder footprint is not. You need to check which of the two sizes fits your cartridge before ordering.

Save Battery Holders for NES SNES N64 - CR2032
CR1616 holder vs CR2032 holder on the supplied details
The table below reflects only what the product records confirm. Where a detail is not stated, treat it as unconfirmed rather than assuming a specification.
- Battery held: CR1616 holder: CR1616, sold separately. CR2032 holder: CR2032, sold separately.
- Stated cartridge compatibility: CR1616 holder: Game Boy, Game Boy Color and Game Boy Advance games. CR2032 holder: NES, SNES, N64 and more.
- Size options: CR1616 holder: one standard variant. CR2032 holder: 25mm and 18mm variants.
- Installation: Both require soldering. No installation steps or temperature guidance are supplied in the records.
- Included quantity: Each listing includes 1x save battery holder.
- Battery included: Not included with either holder; the CR1616 and CR2032 cells are separate purchases.
Match the holder to the cartridge family
Use the cartridge family as the first filter, then confirm the holder size where a choice exists.
- Game Boy, Game Boy Color and Game Boy Advance games: The CR1616 holder is the listed match for these cartridges. Check that the cartridge's current battery is a CR1616 before soldering.
- NES, SNES and N64 cartridges: The CR2032 holder is the listed match. The record says 'and more,' so treat other cartridge types as unconfirmed and verify the cell and footprint yourself.
- Choosing between 25mm and 18mm: The CR2032 holder comes in two sizes, and the listing asks buyers to check their games before purchasing. Measure the existing holder or battery area in your cartridge rather than guessing.
Why a holder changes the next battery replacement
The CR2032 holder record states that it makes it easier to replace the save battery over time when needed. That is the practical argument for a holder over a soldered tab battery: once the holder is in place, the cell is a serviceable part rather than a soldered connection.
The CR1616 holder record does not make the same claim, so do not assume identical long-term behavior from both listings. What both records do confirm is soldering during installation. If you are weighing a holder against a soldered tab battery, the tradeoff is installation effort now versus easier cell changes later.
What the listings do not confirm
Neither record supplies installation steps, soldering temperatures, holder dimensions beyond the CR2032 25mm and 18mm options, or a confirmed list of supported cartridge models beyond the families named above. The CR2032 listing's 'and more' is not a compatibility guarantee for any specific cartridge.
Battery life is not stated for either holder, and no care or safety instructions are supplied. Plan the job around the cartridge you actually have, confirm the cell size and holder footprint before ordering, and treat any cartridge outside the named families as a case to verify rather than assume.
The two holders at a glance
- Game Boy Game Cartridge CR1616 Save Battery Holder: Compatible with Game Boy, Game Boy Color and Game Boy Advance games; soldering required; includes 1x holder. This is the holder to choose when the cartridge takes a CR1616 cell.
- Save Battery Holders for NES SNES N64 - CR2032: Compatible with NES, SNES, N64 and more; soldering required; includes 1x holder. This is the holder to choose when the cartridge takes a CR2032 cell, after confirming the 25mm or 18mm size.



