Game Boy DMG Screen Lens Replacement Guide

Quick answer

Replace your original Game Boy DMG screen lens with a tempered glass version for better scratch resistance and clarity. The swap takes about 10 minutes with basic tools.

Step-by-step installation

1. Remove the old lens: Heat the old lens gently with a hair dryer for 30-60 seconds to soften the adhesive. Use a plastic spudger or guitar pick to pry it up from a corner. Work slowly to avoid cracking the lens or damaging the shell. Don't use metal tools—they can scratch the shell or the LCD underneath.
2. Clean the lens recess: Peel off any remaining adhesive residue. Wipe the recess with isopropyl alcohol on a microfiber cloth until it's completely clean and dry. Any dust or glue left behind will show as bumps under the new lens. Use compressed air to blow out dust from the corners before applying the new lens.
3. Apply the new tempered glass lens: Peel the backing from the new lens adhesive. Align it carefully over the recess—once it touches the shell, it bonds instantly. Press firmly from the center outward to push out any air bubbles. If you misalign the lens, don't try to lift it—the adhesive is permanent. Remove and replace with a new lens.

Product facts

• Game Boy DMG Tempered Glass Screen Lens: Made of tempered glass, unlike all other cheap copies on the market. Tough durability, can be dropped from head height onto concrete multiple times without damage. You get a lens that resists scratches and impacts far better than the original plastic, keeping your screen clear for years.